Seco-Larm SD-9263-KSVQ Enforcer "No Touch" RTE Plate with Adjustable Delay Timer and Override Button, Outdoor Use, Single-gang

Overview:

ENFORCER "No Touch" Request-To-Exit Plates use IR technology to request egress from a protected area or to activate a device with the simple wave of a hand. Since they require no touch, these plates are ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

Features:

• Weather-resistant (IP65) for outdoor use
• Clean and simple no-touch operation reduces the risk of cross-contamination
• Adjustable sensor range up to 7" (18cm)
• Stainless-steel plate, available in slimline or single-gang
• 1A relay, adjustable trigger duration 0.8~30 second
• Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated
• Manual override button functions without electricity in case of power failure

Specifications:

Type "No Touch" Request-to-Exit Plates with Adjustable Delay Timer, for Outdoor Use
Sensing Range 2"~7" (5~18cm)
Current Draw Standby - 16mA@12VDC / 25mA@24VDC, Triggered - 25mA@12VDC / 32mA@24VDC
Operating Voltage 12~24 VDC
Response Time 10mS
LEDs - Red Standby (Colors are reversible.)
LEDs - Green Triggered (Colors are reversible.)
Relay Type Form C dry contact, 1A@30VDC
Output Time 0.5~30 s, toggle
Switching Capacity 1A@30VDC
Enclosure IP65
Operating Temperature -4°~131° F (-20°~55° C)
Weight 125g
Dimensions 4-1/2" x 2-3/4" x 1-1/2" (115 x 70 x 39 mm)